April 6, 2020

Tranding Stories

World Tranding News

Things To Consider When Choosing A Water Pump For Hire

A water pump hire helps to transport water by transforming the energy supplied by the motor into hydraulic energy. When choosing a water pump for hire, you need to consider the media you want to pump. There are different types of water that you may want to pump such as Storm water, drinking water and slurry. The technical characteristics of the water should be taken into account because they are critical in determining the choice of the water pump. To calculate the operating point of the water pump, it is essential to know the parameters of the network such as the suction head, the flow rate, the head losses, the discharge head and more.
This guide will give you an idea of the main types of pumps and their use. We will deal with hydraulic pumps or vacuum pumps and it is important to understand that these two products differ in application technology. They are offered and presented separately.

Choosing the right pump for hire

For you to choose a pump that meets your needs, it is important to determine the features of the pump and how it will facilitate your project. You need to start by determining the type of media you want to transfer to avoid premature wear of the pump. You need to know the composition of the media, the viscosity and whether the media contains solid components. For example, Storm water may contain pebbles and other debris while drinking water may contain chlorine if chlorine was used to treat it. Before I opt for water pump hire near me in Australia, I have to know the exact components of the water I want to pump.
Thorough knowledge of the water you want to pump will allow you to choose the right technology for your application. It will also be useful in choosing the right construction material. Once you know the components of the water you want to pump, you should consider the following things.

The flow

You need to know the flow you require which is measured in cubic meters per hour or gallons per minute. It is important to consider the flow because it influences the dimensions and the size of your pump.

Suction head

The suction head is the height between the pump and the inlet of the suction pipe. The suction head should not exceed 10 meters. It is necessary to consider using a submersible pump if the suction head is beyond 10 meters.

Discharge head

This refers to the height between the discharge pipe outlet and the pump.

The temperature

You need to consider the temperature of the water you want to pump before choosing a water pump. Make sure the pump material can withstand the temperatures of the water especially if you are pumping hot water.
 
The above things will help you choose the right water pump hire for your project. Choosing the right water pump will ensure efficiency and it will help you save time and money. You will also prevent pump damage if you use it for what it was meant to be used for.